


YARIMKÜRE İNŞAAT MÜMESSİLLİK TURİZM İTHALAT İHRACAT SANAYİ VE TİCARET LTD. ŞTİ.
BORU HATLARI İNŞAATLARI İÇİN EKİPMAN, MALZEME VE HİZMETLER / PIPELINE CONSTRUCTION EQUIPMENT, SUPPLIES AND SERVICES
BORU HATTININ BİR UCUNDAN DİĞERİNE HİZMETİNİZDEYİZ
1990 - 2023
WE ARE AT YOUR SERVICE FROM ONE END OF PIPELINE TO THE OTHER
Adres :
Mutlukent Mahallesi, Ankara 85 Sitesi,
2020. Sokak No.21, Beysukent, Çankaya,
Ankara 06800 Türkiye
Depo: Ostim, Örnek Oto Sanayi, 1262 Sokak No.17 Yenimahalle, Ankara, Türkiye
Tel : 312-2363217
GSM: 553-1707875
Eposta : info@hempipe.com
Eposta : hemispherecoltd@gmail.com
https://www.hempipe.com
Ticaret Sicil No. 79333
ISO 9001:2015 Cert. No. 55929
Doğanbey V.D. 9380023742

Address :
Mutlukent Mahallesi, Ankara 85 Sitesi,
2020. Sokak No.21, Beysukent, Çankaya,
Ankara 06800 Türkiye
Warehouse: Ostim, Örnek Oto Sanayi, 1262 Sokak No.17 Yenimahalle, Ankara, Türkiye
Tel : +90-312-2363217
GSM: +90-553-1707875
Email : info@hempipe.com
Email : hemispherecoltd@gmail.com
https://www.hempipe.com
Registry No. 79333
ISO 9001:2015 Cert. No. 55929
Tax Id. No. 9380023742
Yarımküre İnşaat Ltd. Şirketi 1990 yılından beri petrol, doğal gaz ve su boru hatları ve petrol sondaj ve üretimi için makina, ekipman, malzeme ve hizmetler sunmaktadır. Ürün ve hizmetlerimiz Türkiye haricinde Orta Doğu, Orta Asya, Kafkaslar ve Avrupa'yı da kapsamaktadır. Başlıca ürünlerimiz boru bükme makinaları, boru kelepçeleri, boru kesme makinaları, makaralı sapanlar, montaj ve boğma sapanları, polyester sapan, kaynak elektrotları ve kaynak malzemeleri, soğuk sargı bantları, sıcak sargı bantları, keson izolatörleri ve başlıkları, hidrostatik test cihaz ve malzemeleri, dolum ve temizlik pigleri, dolum ve basınçlandırma pompaları ve basınçlı hava kurutma üniteleridir. Saha hizmetlerimiz ise boru kaynağı, boya ve kaplama, soğuk boru kesme, test, muayene, tamir, hidrostatik test, hava kurutma ve kaliper pig ile muayenedir.
Yarımküre / Hemisphere Co. is one of the leading companies in Turkey in oil & gas field equipment and services. We have been supplying pipeline construction and oilfield equipment and accessories since 1990. Our services include welding, coating, pipe cutting, hot-tapping, inspection, testing, commissioning and repair. We provide our products and services not only in Turkey but also in the Middle East, the Caucasus and Europe. Some of the products we provide are as follows: pipe bending machines, internal pneumatic pipe line-up clamps, external pipe clamps, roller cradles, lowering-in belts, lined-steel choker belts, casing spacers and end seals, pipeline air dryers, pipeline pigs, pipeline field joint coatings and hydrostatic test equipment.
Our field services include pie welding, coating, pipe cutting, test, inspection, repair, hydrostatic test, air drying and pipeline geometry inspection.

PIPE INDUCTION HEATING EQUIPMENT

Our company is a distributor for the Italian Parmaprogetti company which a leader in pipe induction heating technologies. Parmaprogetti's has a wide range of induction heating generators for pipe preheating, field joint coating and heat treatment applications. Please use the following link for the Parmaprogetti Catalog:

Delta 50
This inverter generator embodies the best of our 40-year experience in the induction heating field for pipelines.
This very same expertise has since been applied to all of Parmaprogetti’s generator series.
Delta50 is the smallest generator available on the market in terms of size and power supplied. Power can be adjusted to a maximum of 70 kW depending on the customer’s need.
Delta50 is the only generator that can operate connected in clusters, thereby multiplying the power available. Easy to use with simple push start and stop buttons, it has different levels of programming, which make it suitable for all pipeline applications.
Supplied by three-phase voltage, this generator operates exclusively with power-factor 1, even during the heating phase, thus preventing magnetic loss in the output cables and allowing for runs of more than 100 m to be set up.
Thanks to its unique characteristics, Delta50 is unrivaled in offshore applications, where it is often used together with a twin generator, which is always available in the event that a dual power supply is required or a ready-to-use spare generator is needed for maintenance purposes.
Delta50 is effective when employed in onshore applications too, as it is easy to transport and can be supplied by a small genset or with other set-ups.

Delta 200
The Delta200 inverter generator combines high power and small dimensions and is very easy to use thanks to Parmaprogetti’s exclusive software for induction heating. Power can be adjusted from the maximum to the minimum value depending on the three-phase power supply available.
Just as high-performing as all of our induction heating generators, Delta200 is mostly used when the period of time required for heating is very short or when a metal mass needs to be heated to a very high temperature. This makes it the best solution for coating plants, as it does not cause dephasing or interfere with the mains power supply and no additional cooling circuits are needed.

Delta 350
The Delta350 inverter generator combines high power and small dimensions and is very easy to use thanks to Parmaprogetti’s exclusive software for induction heating. Power can be adjusted from the maximum to the minimum value depending on the three-phase power supply available.
Just as high-performing as all of our induction heating generators, Delta350 is mostly used when the period of time required for heating is very short or when a metal mass needs to be heated to a very high temperature. This makes it the best solution for a coating plant, as it does not cause dephasing or interfere with the mains power supply and no additional cooling circuits are needed.

Giano 200
Giano200 is the only self-supplied generator on the market with the dual function of supplying both single-phase voltage with variable frequency for induction heating and, at the same time, three-phase voltage for powering welding machines and other accessories.
Thanks to the built-in inverter and to the same advanced technology used in all Parmaprogetti’s static generators, Giano200 is able to transfer up to 200 kW during the pipe-heating process. The power produced is enough to achieve the best performance levels in all preheating and coating applications in the onshore sector.
Parmaprogetti guarantees full customer support. Spare parts and set-ups can be provided on request.

Mach 2 ve Mach 3 Induction Heating Tractors



Heating coils for various applications